Fault analysis of the bearing temperature of pulp pump is too high

    Pulp pump in the use of engineering will encounter a variety of failures, bearing temperature is too high is one of the common failures, so what is the reason for this failure? How to solve it?
The bearing temperature of the pulp pump is too high. The reasons for the failure may be as follows:
1, this may be due to the pulp pump in the process of working vibration is too large, resulting in the temperature of its bearing is too high.
2. It may be that the lubricating oil of the bearing is not enough, then add lubricating oil.
3. It may also be that there is too much lubricating oil in the bearing, so reduce the lubricating oil.
4, there is also a possibility that you use the wrong lubricating oil, it needs to change the corresponding lubricating oil.
5. It may be that the bearing is damaged, and the bearing needs to be replaced.
6. It may also be that the lubricating oil is too dirty, and it needs to be replaced with new lubricating oil.
7. In addition to the lubricating oil being too dirty, it may be that the lubricating oil has deteriorated, which also needs to be replaced.
The bearing temperature of the pulp pump is too high the possible causes of failure are the above, of course, there may be other reasons in the actual operation, welcome to add, also hope this is useful to you.

Article from the Internet: pulp pump bearing temperature is too high fault analysis